Why Is it so difficult to ride my bike?

More and more people are joining the cycling trend to get exercise each when they travel either to their workplace or simply for a stroll.

One of the most common issues that typically occur to all those who use bicycles is that for various reasons when you go to pedal the bike feels very difficult, and you must be extremely cautious with the reasons that produce this as the consequences could vary, from damage to the bike, have an accident, or cause injury to the rider.

To make sure that this does not happen, check for any undue friction by turning the wheels using your hands and then lifting the bike upside-down with the wheels elevated.

You’re in the wrong gear.

The most common and easiest reason for you to have difficulty pedaling is due to using the wrong gear. If you’re riding up a hill, or just starting to ride it is possible your pedals extremely difficult to push, but it will get easier as you go.

If you begin in a lower speed with the help of your shifter, you’ll find it much easier to get going! Once you get to the speed you want you will be able to gradually shift to the lower gears.

The friction between the brake pads and rubber

The friction caused by friction between one of the brake pads against your rims is an usual reason. It could be as simple as just changing the brake, but it could also be based on a bent rubber, which is a more complicated inconvenience to accommodate.

There have been occasions when bicycles with new bearings were very loose. It is possible to check this by taking off the wheel and turning it with your hands.

Although performing this procedure will require several special tools and some knowledge in the area of bicycle mechanics, so it is recommended to take it to a mechanic directly.

The rubber should be brushed between the frame and the frame

If your bike feels difficult to push, it could be because the rubber is getting caught against the frame. This could be because of a bent fork or rubber (in case of the front wheel) or the frame (if the rear wheel is the wheel).

This is a common problem with older bikes, specifically those with eyelets that allowed for tension to be adjustable. So if the rear wheel axle is not properly adjusted in the frame, the wheel could become misaligned due to the tension on the chain while pedaling.

Too tight in the bottom bracket

The bottom bracket around the pedals’ cranks could be too tight, leading to friction. This problem commonly occurs in very low-cost or old bikes that have an adjustable bottom bracket.

You can test this by removing the chain from the chainring, and verifying that there isn’t any friction between the moving object and the chainring.

A specialist should be able to adjust the bottom bracket in a proper manner. This is because it requires special tools and knowledge about mechanics. The result could cause friction, and it is worth replacing the adjustable bracket with a modern type of bracket, like a cartridge.

  • What is the reason mountain bikes come with hard seats?
  • Which one is the best fit for you?
  • Do you have the ability to mountain bike using an Hybrid Bicycle?

Low tire pressure

A low tire pressure directly impacts the ability of your bike to travel at speed. To keep a certain pace you’ll need to push harder. To maintain a certain pace, you might have to pedal harder if you are riding with other riders.

There are two possibilities. First, small punctures often happen frequently, and causes the air to be lost progressively instead of deflating all at once. If this happens it is crucial to stop and replace the tube right away.

But you should also inspect the rubber very carefully in the event that the puncture is caused by a barb and the tire is not always spiked.


This may sound odd however there are easy ways to fix difficult pedaling issues like flat tires or using the gears that are too heavy.

Therefore, if it is the case of flat tires, it is as simple as we indicated above, but if it is the gears, you must learn to utilize the gears properly, so that when pedaling, you do not feel that the bike is extremely difficult as if you were breaking it.

BY-FAR the BEST Bike Repair. Packed with STEP-BY-STEP easy-to-follow video guides.